# 2024 Version Update ## Version 0.5.1-beta Release Date : 2024/12/27 ### Update * Adapt to the new license application address ### Notes * This is still a beta version and may contain many bugs. * Only supports Windows 7/10 (x64) or above * OpenGL 2.1 or above * Some modules require license authorization to be used ## Version 0.5.0-beta Release Date : 2024/12/27 ### New * During software operation, it will prevent the system from entering sleep mode and turning off the screen * Real time preview interface, newly added prompt dialog box for hardware operation failure ### Fix * Fixed the issue where the analysis results on the detailed page of the experiment were not cleared when switching between different time points * Fix the issue of email failure in scratch analysis warning function * Fixed the issue of license expiration due to occasional clicking on a single shot * Fixed the issue of incorrect display effect after switching between SA_TenX and SA_TwentyX objectives * When the analysis of the page is not completed, limit the progress to the previous or next step * Occasionally unrecognized issues when importing local image files * Repair the hard drive occasionally causing error warning judgment * Image viewing page, pre-processing changed to single choice. * Incorrect display of scale bar length when switching channels and objective lens to view images * The issue of incorrect display of scale color and length * The problem of unable to export images after z-stack shooting * The problem of incomplete display of images in the experimental selection/module introduction interface * Fixed the issue of incorrect scale display after overlaying images taken with different objective lenses ### Optimize * Optimize scratch analysis, add adaptive parameter function, remove smoothness adjustment * Refine English translation * Before switching the objective lens, reset it first * Select multi-channel fusion for exporting videos, add channel name to the export name * The default directory for storing experimental files is the hard disk partition with the maximum available space * The minimum area adjustment upper limit of the bright field and fluorescence channel in basic cell analysis remains consistent * Limit the input of circular kernel radius and Gaussian fuzzy kernel size * Z-stack page parameter input restrictions * Optimized contrast algorithm ### Notes * This is still a beta version and may contain many bugs. * Only supports Windows 7/10 (x64) or above * OpenGL 2.1 or above * Some modules require license authorization to be used ## Version 0.4.2-beta Release Date : 2024/12/16 ### Update * Modify the server address of the license * Change the screen refresh mechanism to global refresh ### Notes * This is still a beta version and may contain many bugs. * Only supports Windows 7/10 (x64) or above * OpenGL 2.1 or above * Some modules require license authorization to be used ## Version 0.4.1-beta Release Date : 2024/12/16 ### Fix * Fix license related errors * Fix errors related to single shot files * Fix module license status display error ### Notes * This is still a beta version and may contain many bugs. * Only supports Windows 7/10 (x64) or above * OpenGL 2.1 or above * Some modules require license authorization to be used ## Version 0.4.0-beta Release Date : 2024/11/22 ### New 1. Add floating prompt 2. Add User Help Manual (right-click menu in title bar ->Help) ### Notes * This is still a beta version and may contain many bugs. * Only supports Windows 7/10 (x64) or above * OpenGL 2.1 or above * Some modules require license authorization to be used ## Version 0.3.9-beta Release Date : 2024/11/11 ### Fix * Prevent repeated clicks on ZStack * Fix display orientation errors in external images ### Optimize * Optimize the display of analysis progress information * Accelerate the reading speed of imports ### Notes * This is still a beta version and may contain many bugs. * Only supports Windows 7/10 (x64) or above * OpenGL 2.1 or above * Some modules require license authorization to be used ## Version 0.3.8-beta Release Date : 2024/11/7 ### New * Support batch analysis and single analysis * Add image and text explanations for the analysis module * Add the function of reapplying for licenses * Image export supports canceling interrupt process ### Fix * Resolve the issue of unreleased resources after the experiment is completed * Fix the issue where the opacity of the filling cannot be adjusted upwards ### Optimize * Optimize the loading speed of experimental files * Adjust the shooting interval between channels to 1 second ### Notes * This is still a beta version and may contain many bugs. * Only supports Windows 7/10 (x64) or above * OpenGL 2.1 or above * Some modules require license authorization to be used ## Version 0.3.7-beta Release Date : 2024/10/31 ### Optimize * Optimize the loading speed of experimental files ### Fix * After switching channels, the automatic exposure status is incorrect ### Notes * This is still a beta version and may contain many bugs. * Only supports Windows 7/10 (x64) or above * OpenGL 2.1 or above * Some modules require license authorization to be used ## Version 0.3.5-beta Release Date : 2024/10/24 ### New * Change the software name from `CellLiving` to `CellPerception` * Add functions related to hardware parameter templates * New email for warning method * Add a special effect of flashing during shooting * Video export supports MP4 format ### Optimize * Reduce the sensitivity of memory alerts ### Fix * Run the command to return the X-axis to the origin only in a multi lens configuration ### Notes * This is still a beta version and may contain many bugs. * Only supports Windows 7/10 (x64) or above * OpenGL 2.1 or above * Some modules require license authorization to be used ## Version 0.3.4-beta Release Date : 2024/10/18 ### Fix * Fix the issue of incorrect command for returning X-axis to origin ### Notes * This is still a beta version and may contain many bugs. * Only supports Windows 7/10 (x64) or above * OpenGL 2.1 or above * Some modules require license authorization to be used ## Version 0.3.3-beta Release Date : 2024/10/17 ### New * The installation package can choose whether to install USB and camera drivers * The batch analysis function is executed according to the parameters set by the user * Added warning function, including alerts for confluence and wound heal rate * Add the function of returning the X-axis to the origin, after the device is successfully started. ### Optimize * Serial communication, adding timeout mechanism to prevent infinite waiting * The maximum range of hole in basic cell analysis has increased from 2000 to 5000 ### Notes * This is still a beta version and may contain many bugs. * Only supports Windows 7/10 (x64) or above * OpenGL 2.1 or above * Some modules require license authorization to be used ## Version 0.3.2-beta Release Date : 2024/10/12 ### New * Add the function of pausing and resuming experiments ### Optimize * Optimize the file list reading process * Optimize the process of creating experimental files * Improve the stability of experimental operation ### Fix * Fix the issue of inaccurate shooting times in ZStack * Fix the issue of invalid video speed settings * Fix scratch analysis input parameter errors ### Notes * This is still a beta version and may contain many bugs. * Only supports Windows 7/10 (x64) or above * OpenGL 2.1 or above * Some modules require license authorization to be used ## Version 0.2.0-RC4 Release Date : 2024/9/29 ### Fix * Fix the issue of ineffective video playback speed ### Notes * This is a candidate version that may have a few bugs * Only supports Windows 7/10 (x64) or above * OpenGL 2.1 or above * Some modules require license authorization to be used ## Version 0.3.1-beta Release Date : 2024/9/27 ### New * Add prompts to prevent users from switching pages when autofocus or ZStack is not completed * Exporting images allows you to choose whether to include scale units or not ### Fix * Fix the issue of ineffective shooting based on the total duration * Resolve the issues caused by concurrent and out of order tasks during time series shooting * Resolve the issue of exporting TIFF format files that do not support Chinese paths ### Notes * This is still a beta version and may contain many bugs. * Only supports Windows 7/10 (x64) or above * OpenGL 2.1 or above * Some modules require license authorization to be used ## Version 0.3.0-beta Release Date : 2024/9/26 ### New * Add the function of checking and prompting disk space on the experiment schedule page * Regularly check the available size of memory and disk, and prompt if it is less than 1GB * New shooting progress for ZStack ### Optimize * Scratch analysis fills small impurities in the scratch area * Optimize the operational process of time series shooting * Optimize the running process of batch analysis tasks * In ZStack shooting, prioritize capturing the channels before moving the Z-axis ### Fix * Fix inaccurate eccentricity in basic cell analysis. * Fix the issue of inaccurate average fluorescence intensity in basic cell analysis. ### Notes * This is still a beta version and may contain many bugs. * Only supports Windows 7/10 (x64) or above * OpenGL 2.1 or above * Some modules require license authorization to be used ## Version 0.2.0-RC3 Release Date : 2024/9/13 ### New * Exposure gain supports decimal adjustment * Export images and videos with time, preprocessing, and scale bar * Exporting videos supports Chinese paths ### Optimize * The analysis page only analyzes the images of the channels selected by the user * Optimize the loading process of experimental files ### Fix * Resolve the issue of the image selection page leaving the previous items * Objective lens switching should not be performed when the device only has one objective lens * Fix analysis cannot be deselected issue * Fix the issue of abnormal overlay image effects * Fixed the issue of only displaying single channel analysis results when enabling ZStack and setting up multi-channel shooting in the experimental settings * Fixed the issue where the preprocessing state was not reset when switching between different files * Fix the issue of displaying channels that have not been captured, in the export dialog ### Notes * This is a candidate version that may have a few bugs * Only supports Windows 7/10 (x64) or above * OpenGL 2.1 or above * Some modules require license authorization to be used ## Version 0.2.0-RC2 Release Date : 2024/9/4 ### New * Added simulation image setting function, in debugging mode ### Optimize * Optimization analysis results display proportion ### Fix * Fix program crashes in some operating systems * Fix the issue of inconsistent brightness between the preview image and the original image ### Notes * This is a candidate version that may have a few bugs * Only supports Windows 7/10 (x64) or above * OpenGL 2.1 or above * Some modules require license authorization to be used ## Version 0.2.0-RC1 Release Date : 2024/9/2 ### New * Add overlay image display to some interfaces * Add the function of storing abnormal information after program crashes ### Optimize * Reduce CPU usage for loading experimental files ### Fix * Fix the issue where the experiment cannot be stopped * Fix issues related to ZStack position adjustment * Fix the crash issue caused by inconsistent running environment of image preprocessing * Fix the issue with setting the experimental time interval * Fix the issue of excessive brightness in the overlay display effect ### Notes * This is a candidate version that may have a few bugs * Only supports Windows 7/10 (x64) or above * OpenGL 2.1 or above * Some modules require license authorization to be used ## Version 0.1.3-beta Release Date : 2024/8/28 ### New * Added the function of adjusting the width of mask lines * Add parameter interface for scratch experiment adjustment * Add the function of exporting experimental analysis data as files * Added scale bar display for exported images * The analysis result table supports copying analysis data to the clipboard * Add 2 new parameters in the basic cell analysis module ### Optimize * Optimize the basic cell analysis * Optimize the loading process of experimental files * Optimize the effect of image overlay * Optimize the display performance of masks ### Fix * Fix the issue of incorrect calculation of start time, interval, and end time on the experimental settings page * Fix file recognition issue caused by Chinese path * Fixed the issue where a single shot cannot export the original image of ZStack * Fix the issue where the experiment cannot be paused * Fix analysis data display errors * Fix the issue of resetting the state of the mask after each analysis is completed * Fix the problem of deconvolution crashing * Fix full screen exception issue * Repair scratch experiment analysis crash issue, during local file analysis process * Fix the issue of not conducting analysis in the experiment when ZStack is enabled in the experimental settings * Fix the issue of incorrect shooting position in ZStack ### Notes * This is still a beta version and may contain many bugs. * Windows 7/10 (x64) or above * OpenGL 2.1 or above ## Version 0.1.2-beta Release Date : 2024/8/16 ### New * Basic cell analysis module, supporting fluorescence channel analysis * Add the function of reanalyzing experimental files again ### Optimize * Optimize some UI interfaces * Optimize the loading process of historical files * Exposure gain adjustment increases sensitivity ### Fix * Fix the issue of incorrect display of analysis results after switching * Fix the issue of not updating the start time in a timely manner on the experiment schedule page * Fix the issue where external files or directories cannot be selected * Fix the issue of Z-axis not being set during the experiment process * Fixed the issue of interface not adapting to size, in the multi view display multi-channel function * Fix the abnormal display issue of the scale bar * Fixed the issue of the device not shutting down after pausing the experiment ### Notes * This is still a beta version and may contain many bugs. * Windows 7/10 (x64) or above * OpenGL 2.1 or above ## Version 0.1.1-beta Release Date : 2024/8/6 ### New * The basic cell analysis module uses new algorithms * Add 2 objective lenses * The analysis results are converted from pixel units to physical size units * Improve Z-Stack functionality and add export and storage functions * Add the function of importing serial image files * New scale, shortcut key `P` can modify the width, color, and opacity. * Add multiple views to display images from multiple channels separately * Time series shooting supports Z-Stack ### Optimize * optimize multi-channel overlay display effect ### Fix * Fix the issue of program crashes caused by entering content in the comment input box ### Notes * This is still a beta version and may contain many bugs. * Windows 7/10 (x64) or above * OpenGL 2.1 or above ## Version 0.1.0-beta Release Date : 2024/7/24 ### Fix * Fix the issue of not generating experimental files ### Notes * This is still a beta version and may contain many bugs. * Windows 7/10 (x64) or above * OpenGL 2.1 or above ## Version 0.0.9-beta Release Date : 2024/7/24 ### New * Add `RWD` for Scratch Experiment * Add video export function * Add the function of deleting analysis results * Add automatic exposure function * Preview page supports modifying the autofocus starting point * New feature for restoring color mapping settings * Add image deconvolution ### Update * The minimum exposure gain value has been changed from 10 to 1 * Change the scalar range of the color mapping to 0-255 * Invalid analysis results not displayed ### Optimize * Accelerate local file reading * Turn off the lights when leaving the preview page ### Fix * Fix the issue of interface not changing when switching images * Fix the issue where the color mapping scalar range does not take effect after modification * Fix the inconsistency between the overlay effect of exported images and the interface display * Fix the issue of failed import of external tif format image files * Fix crash caused by local file read failure ### Notes * This is still a beta version and may contain many bugs. * Windows 7/10 (x64) or above * OpenGL 2.1 or above ## Version 0.0.8-beta Release Date : 2024/7/18 ### New * Add scratch experiment in analysis page. * Time series shooting supports analysis function * Add license module * Add sequence file analysis function * Automatically store and import experiment files * Add the function and page for viewing experiment files ### Optimize * Optimize image contrast and brightness adjustment functions ### Fix * Fix the issue where the 'Stop Autofocus' does not take effect * Fix occasional data reception issue with serial communication module ### Notes * This is still a beta version and may contain many bugs. * Windows 7/10 (x64) or above * OpenGL 2.1 or above ## Version 0.0.7-beta Release Date : 2024/7/3 ### Fix * Fix background color error issue on the analysis page ### Notes * This is still a beta version and may contain many bugs. * Windows 7/10 (x64) or above * OpenGL 2.1 or above ## Version 0.0.6-beta Release Date : 2024/7/3 ### New * Image export function adds multi-channel fusion method * Add 3 image preprocessing functions * Implement UI for partial pages ### Notes * This is still a beta version and may contain many bugs. * Windows 7/10 (x64) or above * OpenGL 2.1 or above ## Version 0.0.5-beta Release Date : 2024/6/28 ### New * New basic/advanced cell analysis for single shot * Add external regular format image import, such as png, jpg, tif * Add Z-Stack for single shot in preview page * New stop autofocus function in preview page * New objective switching function in preview page * New time series shooting and viewing of experimental process * Supports 2D/3D rendering engine, default 2D, can be switched through the system settings page ### Fix * Fix occasional failure of command sending function in serial port module ### Optimize * Optimize multi-channel overlay display ### Notes * This is still a beta version and may contain many bugs. * Windows 7/10 (x64) or above * OpenGL 2.1 or above