2024 Version Update

Version 0.5.1-beta

Release Date : 2024/12/27

Update

• Adapt to the new license application address

Notes

• This is still a beta version and may contain many bugs.

• Only supports Windows 7/10 (x64) or above

• OpenGL 2.1 or above

• Some modules require license authorization to be used

Version 0.5.0-beta

Release Date : 2024/12/27

New

• During software operation, it will prevent the system from entering sleep mode and turning off the screen

• Real time preview interface, newly added prompt dialog box for hardware operation failure

Fix

• Fixed the issue where the analysis results on the detailed page of the experiment were not cleared when switching between different time points

• Fix the issue of email failure in scratch analysis warning function

• Fixed the issue of license expiration due to occasional clicking on a single shot

• Fixed the issue of incorrect display effect after switching between SA_TenX and SA_TwentyX objectives

• When the analysis of the page is not completed, limit the progress to the previous or next step

• Occasionally unrecognized issues when importing local image files

• Repair the hard drive occasionally causing error warning judgment

• Image viewing page, pre-processing changed to single choice.

• Incorrect display of scale bar length when switching channels and objective lens to view images

• The issue of incorrect display of scale color and length

• The problem of unable to export images after z-stack shooting

• The problem of incomplete display of images in the experimental selection/module introduction interface

• Fixed the issue of incorrect scale display after overlaying images taken with different objective lenses

Optimize

• Optimize scratch analysis, add adaptive parameter function, remove smoothness adjustment

• Refine English translation

• Before switching the objective lens, reset it first

• Select multi-channel fusion for exporting videos, add channel name to the export name

• The default directory for storing experimental files is the hard disk partition with the maximum available space

• The minimum area adjustment upper limit of the bright field and fluorescence channel in basic cell analysis remains consistent

• Limit the input of circular kernel radius and Gaussian fuzzy kernel size

• Z-stack page parameter input restrictions

• Optimized contrast algorithm

Notes

• This is still a beta version and may contain many bugs.

• Only supports Windows 7/10 (x64) or above

• OpenGL 2.1 or above

• Some modules require license authorization to be used

Version 0.4.2-beta

Release Date : 2024/12/16

Update

• Modify the server address of the license

• Change the screen refresh mechanism to global refresh

Notes

• This is still a beta version and may contain many bugs.

• Only supports Windows 7/10 (x64) or above

• OpenGL 2.1 or above

• Some modules require license authorization to be used

Version 0.4.1-beta

Release Date : 2024/12/16

Fix

• Fix license related errors

• Fix errors related to single shot files

• Fix module license status display error

Notes

• This is still a beta version and may contain many bugs.

• Only supports Windows 7/10 (x64) or above

• OpenGL 2.1 or above

• Some modules require license authorization to be used

Version 0.4.0-beta

Release Date : 2024/11/22

New

1. Add floating prompt

2. Add User Help Manual (right-click menu in title bar ->Help)

Notes

• This is still a beta version and may contain many bugs.

• Only supports Windows 7/10 (x64) or above

• OpenGL 2.1 or above

• Some modules require license authorization to be used

Version 0.3.9-beta

Release Date : 2024/11/11

Fix

• Prevent repeated clicks on ZStack

• Fix display orientation errors in external images

Optimize

• Optimize the display of analysis progress information

• Accelerate the reading speed of imports

Notes

• This is still a beta version and may contain many bugs.

• Only supports Windows 7/10 (x64) or above

• OpenGL 2.1 or above

• Some modules require license authorization to be used

Version 0.3.8-beta

Release Date : 2024/11/7

New

• Support batch analysis and single analysis

• Add image and text explanations for the analysis module

• Add the function of reapplying for licenses

• Image export supports canceling interrupt process

Fix

• Resolve the issue of unreleased resources after the experiment is completed

• Fix the issue where the opacity of the filling cannot be adjusted upwards

Optimize

• Optimize the loading speed of experimental files

• Adjust the shooting interval between channels to 1 second

Notes

• This is still a beta version and may contain many bugs.

• Only supports Windows 7/10 (x64) or above

• OpenGL 2.1 or above

• Some modules require license authorization to be used

Version 0.3.7-beta

Release Date : 2024/10/31

Optimize

• Optimize the loading speed of experimental files

Fix

• After switching channels, the automatic exposure status is incorrect

Notes

• This is still a beta version and may contain many bugs.

• Only supports Windows 7/10 (x64) or above

• OpenGL 2.1 or above

• Some modules require license authorization to be used

Version 0.3.5-beta

Release Date : 2024/10/24

New

• Change the software name from CellLiving to CellPerception

• Add functions related to hardware parameter templates

• New email for warning method

• Add a special effect of flashing during shooting

• Video export supports MP4 format

Optimize

• Reduce the sensitivity of memory alerts

Fix

• Run the command to return the X-axis to the origin only in a multi lens configuration

Notes

• This is still a beta version and may contain many bugs.

• Only supports Windows 7/10 (x64) or above

• OpenGL 2.1 or above

• Some modules require license authorization to be used

Version 0.3.4-beta

Release Date : 2024/10/18

Fix

• Fix the issue of incorrect command for returning X-axis to origin

Notes

• This is still a beta version and may contain many bugs.

• Only supports Windows 7/10 (x64) or above

• OpenGL 2.1 or above

• Some modules require license authorization to be used

Version 0.3.3-beta

Release Date : 2024/10/17

New

• The installation package can choose whether to install USB and camera drivers

• The batch analysis function is executed according to the parameters set by the user

• Added warning function, including alerts for confluence and wound heal rate

• Add the function of returning the X-axis to the origin, after the device is successfully started.

Optimize

• Serial communication, adding timeout mechanism to prevent infinite waiting

• The maximum range of hole in basic cell analysis has increased from 2000 to 5000

Notes

• This is still a beta version and may contain many bugs.

• Only supports Windows 7/10 (x64) or above

• OpenGL 2.1 or above

• Some modules require license authorization to be used

Version 0.3.2-beta

Release Date : 2024/10/12

New

• Add the function of pausing and resuming experiments

Optimize

• Optimize the file list reading process

• Optimize the process of creating experimental files

• Improve the stability of experimental operation

Fix

• Fix the issue of inaccurate shooting times in ZStack

• Fix the issue of invalid video speed settings

• Fix scratch analysis input parameter errors

Notes

• This is still a beta version and may contain many bugs.

• Only supports Windows 7/10 (x64) or above

• OpenGL 2.1 or above

• Some modules require license authorization to be used

Version 0.2.0-RC4

Release Date : 2024/9/29

Fix

• Fix the issue of ineffective video playback speed

Notes

• This is a candidate version that may have a few bugs

• Only supports Windows 7/10 (x64) or above

• OpenGL 2.1 or above

• Some modules require license authorization to be used

Version 0.3.1-beta

Release Date : 2024/9/27

New

• Add prompts to prevent users from switching pages when autofocus or ZStack is not completed

• Exporting images allows you to choose whether to include scale units or not

Fix

• Fix the issue of ineffective shooting based on the total duration

• Resolve the issues caused by concurrent and out of order tasks during time series shooting

• Resolve the issue of exporting TIFF format files that do not support Chinese paths

Notes

• This is still a beta version and may contain many bugs.

• Only supports Windows 7/10 (x64) or above

• OpenGL 2.1 or above

• Some modules require license authorization to be used

Version 0.3.0-beta

Release Date : 2024/9/26

New

• Add the function of checking and prompting disk space on the experiment schedule page

• Regularly check the available size of memory and disk, and prompt if it is less than 1GB

• New shooting progress for ZStack

Optimize

• Scratch analysis fills small impurities in the scratch area

• Optimize the operational process of time series shooting

• Optimize the running process of batch analysis tasks

• In ZStack shooting, prioritize capturing the channels before moving the Z-axis

Fix

• Fix inaccurate eccentricity in basic cell analysis.

• Fix the issue of inaccurate average fluorescence intensity in basic cell analysis.

Notes

• This is still a beta version and may contain many bugs.

• Only supports Windows 7/10 (x64) or above

• OpenGL 2.1 or above

• Some modules require license authorization to be used

Version 0.2.0-RC3

Release Date : 2024/9/13

New

• Exposure gain supports decimal adjustment

• Export images and videos with time, preprocessing, and scale bar

• Exporting videos supports Chinese paths

Optimize

• The analysis page only analyzes the images of the channels selected by the user

• Optimize the loading process of experimental files

Fix

• Resolve the issue of the image selection page leaving the previous items

• Objective lens switching should not be performed when the device only has one objective lens

• Fix analysis cannot be deselected issue

• Fix the issue of abnormal overlay image effects

• Fixed the issue of only displaying single channel analysis results when enabling ZStack and setting up multi-channel shooting in the experimental settings

• Fixed the issue where the preprocessing state was not reset when switching between different files

• Fix the issue of displaying channels that have not been captured, in the export dialog

Notes

• This is a candidate version that may have a few bugs

• Only supports Windows 7/10 (x64) or above

• OpenGL 2.1 or above

• Some modules require license authorization to be used

Version 0.2.0-RC2

Release Date : 2024/9/4

New

• Added simulation image setting function, in debugging mode

Optimize

• Optimization analysis results display proportion

Fix

• Fix program crashes in some operating systems

• Fix the issue of inconsistent brightness between the preview image and the original image

Notes

• This is a candidate version that may have a few bugs

• Only supports Windows 7/10 (x64) or above

• OpenGL 2.1 or above

• Some modules require license authorization to be used

Version 0.2.0-RC1

Release Date : 2024/9/2

New

• Add overlay image display to some interfaces

• Add the function of storing abnormal information after program crashes

Optimize

• Reduce CPU usage for loading experimental files

Fix

• Fix the issue where the experiment cannot be stopped

• Fix issues related to ZStack position adjustment

• Fix the crash issue caused by inconsistent running environment of image preprocessing

• Fix the issue with setting the experimental time interval

• Fix the issue of excessive brightness in the overlay display effect

Notes

• This is a candidate version that may have a few bugs

• Only supports Windows 7/10 (x64) or above

• OpenGL 2.1 or above

• Some modules require license authorization to be used

Version 0.1.3-beta

Release Date : 2024/8/28

New

• Added the function of adjusting the width of mask lines

• Add parameter interface for scratch experiment adjustment

• Add the function of exporting experimental analysis data as files

• Added scale bar display for exported images

• The analysis result table supports copying analysis data to the clipboard

• Add 2 new parameters in the basic cell analysis module

Optimize

• Optimize the basic cell analysis

• Optimize the loading process of experimental files

• Optimize the effect of image overlay

• Optimize the display performance of masks

Fix

• Fix the issue of incorrect calculation of start time, interval, and end time on the experimental settings page

• Fix file recognition issue caused by Chinese path

• Fixed the issue where a single shot cannot export the original image of ZStack

• Fix the issue where the experiment cannot be paused

• Fix analysis data display errors

• Fix the issue of resetting the state of the mask after each analysis is completed

• Fix the problem of deconvolution crashing

• Fix full screen exception issue

• Repair scratch experiment analysis crash issue, during local file analysis process

• Fix the issue of not conducting analysis in the experiment when ZStack is enabled in the experimental settings

• Fix the issue of incorrect shooting position in ZStack

Notes

• This is still a beta version and may contain many bugs.

• Windows 7/10 (x64) or above

• OpenGL 2.1 or above

Version 0.1.2-beta

Release Date : 2024/8/16

New

• Basic cell analysis module, supporting fluorescence channel analysis

• Add the function of reanalyzing experimental files again

Optimize

• Optimize some UI interfaces

• Optimize the loading process of historical files

• Exposure gain adjustment increases sensitivity

Fix

• Fix the issue of incorrect display of analysis results after switching

• Fix the issue of not updating the start time in a timely manner on the experiment schedule page

• Fix the issue where external files or directories cannot be selected

• Fix the issue of Z-axis not being set during the experiment process

• Fixed the issue of interface not adapting to size, in the multi view display multi-channel function

• Fix the abnormal display issue of the scale bar

• Fixed the issue of the device not shutting down after pausing the experiment

Notes

• This is still a beta version and may contain many bugs.

• Windows 7/10 (x64) or above

• OpenGL 2.1 or above

Version 0.1.1-beta

Release Date : 2024/8/6

New

• The basic cell analysis module uses new algorithms

• Add 2 objective lenses

• The analysis results are converted from pixel units to physical size units

• Improve Z-Stack functionality and add export and storage functions

• Add the function of importing serial image files

• New scale, shortcut key P can modify the width, color, and opacity.

• Add multiple views to display images from multiple channels separately

• Time series shooting supports Z-Stack

Optimize

• optimize multi-channel overlay display effect

Fix

• Fix the issue of program crashes caused by entering content in the comment input box

Notes

• This is still a beta version and may contain many bugs.

• Windows 7/10 (x64) or above

• OpenGL 2.1 or above

Version 0.1.0-beta

Release Date : 2024/7/24

Fix

• Fix the issue of not generating experimental files

Notes

• This is still a beta version and may contain many bugs.

• Windows 7/10 (x64) or above

• OpenGL 2.1 or above

Version 0.0.9-beta

Release Date : 2024/7/24

New

• Add RWD for Scratch Experiment

• Add video export function

• Add the function of deleting analysis results

• Add automatic exposure function

• Preview page supports modifying the autofocus starting point

• New feature for restoring color mapping settings

• Add image deconvolution

Update

• The minimum exposure gain value has been changed from 10 to 1

• Change the scalar range of the color mapping to 0-255

• Invalid analysis results not displayed

Optimize

• Accelerate local file reading

• Turn off the lights when leaving the preview page

Fix

• Fix the issue of interface not changing when switching images

• Fix the issue where the color mapping scalar range does not take effect after modification

• Fix the inconsistency between the overlay effect of exported images and the interface display

• Fix the issue of failed import of external tif format image files

• Fix crash caused by local file read failure

Notes

• This is still a beta version and may contain many bugs.

• Windows 7/10 (x64) or above

• OpenGL 2.1 or above

Version 0.0.8-beta

Release Date : 2024/7/18

New

• Add scratch experiment in analysis page.

• Time series shooting supports analysis function

• Add license module

• Add sequence file analysis function

• Automatically store and import experiment files

• Add the function and page for viewing experiment files

Optimize

• Optimize image contrast and brightness adjustment functions

Fix

• Fix the issue where the ‘Stop Autofocus’ does not take effect

• Fix occasional data reception issue with serial communication module

Notes

• This is still a beta version and may contain many bugs.

• Windows 7/10 (x64) or above

• OpenGL 2.1 or above

Version 0.0.7-beta

Release Date : 2024/7/3

Fix

• Fix background color error issue on the analysis page

Notes

• This is still a beta version and may contain many bugs.

• Windows 7/10 (x64) or above

• OpenGL 2.1 or above

Version 0.0.6-beta

Release Date : 2024/7/3

New

• Image export function adds multi-channel fusion method

• Add 3 image preprocessing functions

• Implement UI for partial pages

Notes

• This is still a beta version and may contain many bugs.

• Windows 7/10 (x64) or above

• OpenGL 2.1 or above

Version 0.0.5-beta

Release Date : 2024/6/28

New

• New basic/advanced cell analysis for single shot

• Add external regular format image import, such as png, jpg, tif

• Add Z-Stack for single shot in preview page

• New stop autofocus function in preview page

• New objective switching function in preview page

• New time series shooting and viewing of experimental process

• Supports 2D/3D rendering engine, default 2D, can be switched through the system settings page

Fix

• Fix occasional failure of command sending function in serial port module

Optimize

• Optimize multi-channel overlay display

Notes

• This is still a beta version and may contain many bugs.

• Windows 7/10 (x64) or above

• OpenGL 2.1 or above